Two side is done using two register pins. The problem is you will
have to add jumpers to make connections from one side of the board to
the other. With a little thought you can make most boards single
sided. If you let Eagle route your boards you will get double sided
boards 9 out of 10 times.
have to add jumpers to make connections from one side of the board to
the other. With a little thought you can make most boards single
sided. If you let Eagle route your boards you will get double sided
boards 9 out of 10 times.
--- In Homebrew_PCBs@yahoogroups.com, James Washer <washer@t...> wrote:
>
> Two questions
>
> 1) Is it "reasonable" to mill double sided boards?
> 2) Will Eagle(and scripts) provide code to do the drilling (I'd
assume so, but I don't like to make assumptions)
>
> - jim
>
> On Sun, 25 Dec 2005 12:43:28 -0000
> "crankorgan" <john@k...> wrote:
>
> > http://mynock.dhs.org/pcbmilling/
> >
> >
> >
> >
> > --- In Homebrew_PCBs@yahoogroups.com, James Washer <washer@t...>
wrote:
> > >
> > > Nice job John.
> > >
> > > Can you answer a few questions for me? How does one get from an
> > Eagle "brd" to whatever CNC instructions (or whatever they are called,
> > I don't know anything about CNC, sorry).
> > >
> > > What kind of a mill are you using?
> > >
> > > On Sat, 24 Dec 2005 13:17:38 -0000
> > > "crankorgan" <john@k...> wrote:
> > >
> > > > From Eagle to a finished board in less than 1 hour each.
> > > >
> > > >
> > > > Drilled,Sanded and Cut
> > > >
> > > > http://crankorgan.com/perfchop7.JPG
> > > >
> > > > Parts added
> > > >
> > > > http://crankorgan.com/perfchop9.JPG
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Be sure to visit the group home and check for new Links, Files,
> > and Photos:
> > > > http://groups.yahoo.com/group/Homebrew_PCBs
> > > >
> > > > If Files or Photos are running short of space, post them here:
> > > > http://groups.yahoo.com/group/Homebrew_PCBs_Archives/
> > > > Yahoo! Groups Links
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> >
> >
> >
> >
> >
> >
> >
> > Be sure to visit the group home and check for new Links, Files,
and Photos:
> > http://groups.yahoo.com/group/Homebrew_PCBs
> >
> > If Files or Photos are running short of space, post them here:
> > http://groups.yahoo.com/group/Homebrew_PCBs_Archives/
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
>
