I make very small boards so I don't want to run a full page of Toner
Transfer paper.
My technique is simple:
Print the final image on a sheet of regular paper.
Cut out the image.
Tape a piece of toner transfer paper over the hole, attached at the
leading edge with an address label.
Run the page back through the printer.
My printer has a problem printing on a double thickness of paper,
that's why I cut out the page. If your printer doesn't have this
problem then just tape a piece of transfer paper over the printed
image made with the test pass.
Transfer paper.
My technique is simple:
Print the final image on a sheet of regular paper.
Cut out the image.
Tape a piece of toner transfer paper over the hole, attached at the
leading edge with an address label.
Run the page back through the printer.
My printer has a problem printing on a double thickness of paper,
that's why I cut out the page. If your printer doesn't have this
problem then just tape a piece of transfer paper over the printed
image made with the test pass.