Yahoo Groups archive

Homebrew PCBs

Index last updated: 2026-04-28 23:05 UTC

Message

Re: GBC Laminator

2005-10-11 by bob_ledoux

The inexpensive version is the unit sold by Pulsar.gs for their
systems.    They work well with .8mm thick boards.  My experience is
that multiple passes through the unit are required to get good toner
adhesion.
>

Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.