Homebrew PCBs

On Mon, 05 Sep 2005 11:51:15 +0200, patroclus04 <patroclus04@...>  
wrote:

> thank you. I'll try ink jet paper, and try to clean the board better,
> though I alredy used acetone.
>


I'll too write up quickly how i clean boards, again:

1) sand lightly with 600 to 1000 grit paper.

2) wipe away the copper and sandpaper dust

3) put some acetone or alcohol on a paper towel and wipe the board, two  
times using slightly different spots.

The other methods surely work just as well, but that's what i do and i  
haven't run into trouble so far.

ST