Homebrew_PCBs

How much are you thinning the solder paste before you paint it on? It
sounds like you're really thinning it down quite a bit.


Regards, Bob


--- In Homebrew_PCBs@yahoogroups.com, "derekhawkins"
<derekhawkins@y...> wrote:

> This is not an issue. Just paint the whole board with a thin layer

of

> the stuff. The tiny beads of solder that form where there is no

copper

> will wash off easily with water. As with painting, several thin

layers

> are better than one thick layer.