Fairlight-CMI

Haven't done this with a Fairlight, but this is the way I did it with the Ensoniq EPS and Roland S-330:

Get this software
http://hxc2001.free.fr/floppy_drive_emulator/index.html#SoftwareFloppyemulator

Drag and drop the IMD file on the program then click export. You get a HFE file which is the file format of the HxC. Just save it on an SD card.

If this doesn't work, try the Load Raw Image button instead of drag and dropping. It will ask you to enter the parameters of the disk image.


--- In Fairlight-CMI@yahoogroups.com, "Kirk Keyes" <Kirk@...> wrote:
>
> I've got a HxC and a 50 to 34 pin cable adaptor made, and some Fairlight .IMD disk images. Could someone lay out the steps needed to get the IMD files into a form that the HxC can use for the Fairlight? 
> 
> I assume it's like with use on the Emulator II where there is a disk overlay file that must be mated up with the data from the IMD so the HxC can feed it to the Fairlight.
> 
> Thanks!
> Kirk
>