Fairlight-CMI

Right.  You don't need 2 HxC emulators -- each one can look like 2 drives.

I want to have a couple of switches to choose whether each drive select signal goes to the HxC or the old 8" drive.

In my setup now I have both 8" drives disconnected and the HxC is emulating both the left and right drives.

Joe


--- In Fairlight-CMI@yahoogroups.com, "Peter K." <synthserv@...> wrote:
>
> The HxC emulates 2 drives. Doesn't that meen they act as 2 seperate drives?
> 
> Peter Kersten.
> 
> 
> From: WT 
> Sent: Saturday, September 22, 2012 4:26 PM
> To: Fairlight-CMI@yahoogroups.com 
> Subject: Re: [Fairlight-CMI] Re: HxC and CMI IIx Floppydrive replacement
> 
> 
>   
> Yeah, two cardreaders is what I´d go for.
> 
> WT
> 
> ----- Original Message ----- 
> From: "kirk_keyes" <Kirk@...>
> To: <Fairlight-CMI@yahoogroups.com>
> Sent: Saturday, September 22, 2012 3:47 PM
> Subject: [Fairlight-CMI] Re: HxC and CMI IIx Floppydrive replacement
> 
> The actual time to load off the HxC SD card should be the same time as 
> loading off a floppy. At least that's how it is on my Emulator II with the 
> HxC.
> 
> Wouldn't people want to have two HxC on a Fairlight - one with the OS disk 
> on it, and then the second with the sound library on it? Otherwise you'll 
> have to be navagating around on the HxC every time you need to access the 
> OS.
> 
> Kirk
> 
> --- In Fairlight-CMI@yahoogroups.com, "WT" <waveterm@> wrote:
> >
> > It wouldn´t be any different to using actual floppies except for the 
> > loading
> > time.
> >
> > WT
> >
>