Fairlight-CMI

I was experimenting with the page 8 sampling function.
I used a direct output signal from my amp to feed the beast some 
sounds.
I tried some more today and It's staring to work...I made some bad 
audio connections that distorted the signal going into the cmi.

cheers!

-- In Fairlight-CMI@yahoogroups.com, "WT" <waveterm@...> wrote:
>
> Yes I know but I was wondering why you would connect an amp to the 
input of 
> the CMI ?
> 
> WT
> 
> ----- Original Message ----- 
> From: "dd_62622" <dd_62622@...>
> To: <Fairlight-CMI@yahoogroups.com>
> Sent: Tuesday, October 28, 2008 11:54 AM
> Subject: [Fairlight-CMI] Re: IIx sampling
> 
> 
> amplifier   : )
> 
> 
> --- In Fairlight-CMI@yahoogroups.com, "WT" <waveterm@> wrote:
> >
> > Amp ?
> >
> > WT
> >
> > ----- Original Message ----- 
> > From: "dd_62622" <dd_62622@>
> > To: <Fairlight-CMI@yahoogroups.com>
> > Sent: Tuesday, October 28, 2008 1:40 AM
> > Subject: [Fairlight-CMI] IIx sampling
> >
> >
> > Hi
> >
> > I'm trying to make samples using the IIx but no succes so far.
> > The samples came out distorted and noisy.
> > I don't seem to get a good line in level..(much too low I think)
> > Are there users out there that have experience in making your own
> > samples..I used a xlr to jack cable to connect to my amp .,could
> that
> > be the problem?
> >
> > regards,
> > David
> >
>