Hey keyman 88,
To get the "Fusion Kit" to sound the same in your
sequence as it does in the sound bank you have to find out which effect
"Fusion KIt is using. With "Fusion Kit selected in the sound bank
press the EFFECTS button twice in the PERFORMANCE section. This will tell you
what effect is being used. Now go to your sequencer and select the sequence in
which you want to use "Fusion Kit". Now press the EFFECTS button twice
in the PERFORMANCE section. This will tell you what effect this sequence is
using. Using the up and down data entry buttons select the same effect that
"Fusion Kit" uses. Now "Fusion Kit" will sound the same in
the sequence as in the sound bank. But BE AWARE this may change the way the
tracks you have already recorded in the sequence sound. Play the sequence to
hear if the difference is acceptable. You may hear only a subtle change or you
may hear quite a change.But if you want to use "Fusion Kit in this sequence
this will be the effect you will have to use. You will have to decide. Another
thing to remember, if you are going to string several sequences together to make
a song ALL the sequences must use the SAME effect if you want a seamless
transition from one sequence to another. Otherwise there will be a momentary
break in the sound as a different effect is being loaded. Sure hope this helps
you.
Sandy Lane
-----Original Message-----
From: keyman_88 <macaddik@earthlink.net>
To: Ensoniq-VFX-SD@yahoogroups.com <Ensoniq-VFX-SD@yahoogroups.com>
Date: Saturday, November 29, 2003 9:01 PM
Subject: [Ensoniq-VFX-SD] VFX Lettering - ink print panel
Hi all,From: keyman_88 <macaddik@earthlink.net>
To: Ensoniq-VFX-SD@yahoogroups.com <Ensoniq-VFX-SD@yahoogroups.com>
Date: Saturday, November 29, 2003 9:01 PM
Subject: [Ensoniq-VFX-SD] VFX Lettering - ink print panel
Is there anyone or any comapny that has or can do stencil or rub
ons for the lettering on the top panel of the VFX/sd?
I bought a used VFXSD dirt cheap with almost no lettering o nthe
panel.
Also Any help on copying an effect from a bank to the sequencer
section on the VFX/sd? "Fusion Kit sounds good but noe when I select
it in the Sequencer. It is dry as with all my othe sounds.
How do I copy the effects from banks to Sequnces?
Thanks
Happy Holidays!
To unsubscribe from this group, send an email to:
Ensoniq-VFX-SD-unsubscribe@egroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.