Patches and discussion for Ensoniq VFX family

Ehh, those housings can be 3d printed in small runs, or in large runs you could have them made.


From: mailto:Ensoniq-VFX-SD@yahoogroups.com 
Sent: Saturday, October 29, 2016 1:03 PM
To: Ensoniq-VFX-SD@yahoogroups.com 
Subject: Re: [Ensoniq-VFX-SD] Re: Homebrew VFX cartridges.. PCB?

  

I have a couple of VFX RAM carts that I've converted from ROM carts which had been demo carts. If you need one or two just let me know what you think it's worth.

if you have a PCB you still wont have a nice housing...

Hans

Am 29.10.2016 09:45, schrieb koknbull2@... [Ensoniq-VFX-SD]:

    
  Very interesting, I've been wanting a RAM cart for my SD1 for years until I found a genuine RAM cart online (Stor-Cart 32) - but now as this PCB exisits I could be interested if the PCB is available for purchase which is where all the time and effort goes.
  Just a word of caution, there cart PCB for the ESQ1 looks the same except the two are different, the ESQ1 takes a 64k chip and as you say this VFX/SD is the 256k device.




-- 

Hans Artmann
Flüggenstr. 10
80639 München
Tel +49 89 17095720
Fax +49 89 17095722
Mob +49 151 27007919