Patches and discussion for Ensoniq VFX family

If your near a radio shack , use their 60/40 % solder , it's a great
combination for most logic board soldering , it flows quick and easy and has
enough flux in the core to flow well

Tim sullivan

on 8/28/01 12:32 AM, Jeff Obranovich at mdwstmusik@... wrote:

> In either case, make sure when you re-
> soder that you get the polarity right. (+ to +, and - to -)and if you
> decide to soder directly to the battery, make sure you have some flux
> or else you'll have a heck of a time getting the soder to stick.
> Hope this helps,