Patches and discussion for Ensoniq VFX family

Thank you for the reply.  I would welcome any patch settings that you
can provide.
I am not really lost on the VFX at this point, because I am mainly
using it for drums and bass to augment my system.  The 12 Preset main
template is what I use on it at present.  I will get the drive fixed
and eventually get one of my computers for have a MIDI interface.  I
mainly do everything via hardware in my studio.  Everything is
connected via MIDI, including my hard drive recorder, but none of it
is connected to my computer.  I was too busy buying boards and
outboard gear to worry about getting my computer outfitted for MIDI
work...

Anyway, thank you again and I look forward to the information.

Harry Ebbeson III
Ebbeson Management Group
www.geocities.com/ebbrecords




--- In Ensoniq-VFX-SD@yahoogroups.com, hans-artmann@t... wrote:
> What I could deliver is information on what voices, .i.e. instruments
> are used with which patch select.
> However some other settings related to the voices might be even more
> important.
> Maybe there's someone out there who has got a VFX editor like Sound
> Quest and could read out the 
> values from there more easily???
> With no MIDI and no floppy drive you seem to be lost... 
> 
> Hans
> 
> 
> 
> -----Original Message-----
> Date: Mon, 10 Jan 2005 03:10:55 +0100
> Subject: [Ensoniq-VFX-SD] Re: Sounds on Paper...
> From: "Harry" <ebbrecords@y...>
> To: Ensoniq-VFX-SD@yahoogroups.com
> 
> 
> 
> Thank you for the sounds.  At this point I am unable to get them from
> the computer to the VFX-SD.  I do not have the MIDI interface on the
> computer.  I am going to look into it tomorrow at the office and see
> what I can come up with.
> Do you have the programs written out anywhere as to what their voice
> settings are?  Do anyone else have that information as well that I
> could pull the information from?  I keep thinking of my previous
> issues of the Transoniq Hacker (I had years of these things once) and
> they had the sound settings in there.
> 
> I do have a lead sax sound that I have tried to re-create from memory
> and have most of it done.  when I figure out how to do the 3-note
> trill, I will post it to the Files section of our group.
> 
> My VFX had the same programs in both RAM and ROM when I got it, so I
> have had to make some of the old sounds from memory.
> 
> Does anyone have a conversion program from SYX files to a DOS file?
> I have a Yamaha MDF-II Midi Data filer that can play DOS files.
> 
> Additionally, I thank you for the information on the Violin patch.  I
> also have an Ensoniq SQ2 32-Voice, and have a great solo violin patch
> I made on there.
> 
> Thank you,
> 
> Harry Ebbeson III
> Ebbeson Management Group
> 
> 
> 
> 
> 
> 
> 
> 
> 
> Yahoo! Groups Links