Hans will be able to explain
the situation with downloading those files from "emu.com" far, far better than I
can. I have never used those files provided by that website so I am not an
expert but I think you must first install the Giebler EDE software Hans
referred to which actually converts the downloaded 4.10 operating system you are
referring to into something the SD1 can read. Also, if you are not aware, the
SD1 disk drive reads only "Double-Density" floppies and will not read the
standard type floppy you use in your desktop computer. So if you have downloaded
the Version 4.10 file from the site referred to by Hans and then tried to use
that disk in the SD1 - the SD1 will indeed just sit there staring back at
you.
But again, I am aware of the
procedure Hans has mentioned and referred you to but know little or nothing
about the specifics since I have personally never used it.
Sorry.......
Alan
----- Original Message -----From: Jay BarnesSent: Sunday, January 02, 2005 12:15 PMSubject: Re: [Ensoniq-VFX-SD] SD-1 sequencer softwareAlan,
I appreciate that. In looking at that site I'm not
seeing anything sequencer specific. Should I assume
that the sequencer program is contained in the 4.10
disc? If that's the case it would appear that the
disc I have isn't any good. Floppies do tend to go
bad. When I load the 4.10 disk and do the load
command it does nothing. I bought my SD1 used a
couple of years ago and there's no telling how old the
disks are or how they were stored by the, at least 2
previous owners. I can't stand not having my keyboard
operating. I do all my drums on it as a group of
sequences as well as piano and organ.
Jay
> Jay,
>
> Hans has forwarded you information for your
> sequencer operation. Hopefully that will help you
> out.
>
> In addition to his help, my SD-1 sequencer operating
> system is Version 4.10 and requires ROM operating
> system 4.0 or higher. If worse comes to worse, I
> would be happy to mail you a copy of my O. S. disk.
> Let me know and I will email you at your personal
> email address and get your address.
>
> Alan
> ----- Original Message -----
> From: Jay Barnes
> To: Ensoniq-VFX-SD@yahoogroups.com
> Sent: Sunday, January 02, 2005 9:49 AM
> Subject: [Ensoniq-VFX-SD] SD-1 sequencer software
>
>
>
> Reg Took your advise. Here's the new post.
>
> My sequencer went down on my SD-1 32 voice. The
> read out
> says "Sequencer Must Be Loaded."
>
> It takes floppies to load programs. Of course the
> only floppy I
> don't have is the sequencer sofware.
>
> Anyone have any idea if there is a download
> somewhere to
> reload the sequencer?
>
> I really hate that I lost my sequences that I
> worked so hard on.
> (Back up Back up Back up!)
>
> Thanks.
>
> Jay
>
>
>
>
>
>
>
------------------------------------------------------------------------------
> Yahoo! Groups Links
>
> a.. To visit your group on the web, go to:
> http://groups.yahoo.com/group/Ensoniq-VFX-SD/
>
> b.. To unsubscribe from this group, send an
> email to:
> Ensoniq-VFX-SD-unsubscribe@...m
>
> c.. Your use of Yahoo! Groups is subject to the
> Yahoo! Terms of Service.
>
>
__________________________________
Do you Yahoo!?
Meet the all-new My Yahoo! - Try it today!
http://my.yahoo.com