Yahoo Groups archive
Thread
2002-02-17 by jason kahn
hi i just installed an a-199 spring reverb module in my a-100 (suitcase model) and i can't seem to get rid of a bad hum from the unit. i mounted both the actual reverb mechanism and the control panel in the upper left corner of the case, as far away from the power inlet as possible--but still: hummmmmmmmmmmmmmmmm. does anyone have some tips how to silence this module? thanks. jason kahn
2002-02-17 by thepeak
Hi One must mount the reverb spring away from the power supply, hence the phono sockets available.from that u r using the unit in live applications. Construct a small box to mount the unit in. try kicking it!
-----Original Message----- From: jason kahn [mailto:kahn@attglobal.net] Sent: Sunday, February 17, 2002 1:56 PM To: doepfer_a100@yahoogroups.com Subject: [Doepfer_a100] A-199 Spring Reverb hum hi i just installed an a-199 spring reverb module in my a-100 (suitcase model) and i can't seem to get rid of a bad hum from the unit. i mounted both the actual reverb mechanism and the control panel in the upper left corner of the case, as far away from the power inlet as possible--but still: hummmmmmmmmmmmmmmmm. does anyone have some tips how to silence this module? thanks. jason kahn Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/M=217097.1884387.3381019.1261774/D=egroupweb/S=17050321 44:HM/A=960173/R=0/*http://service.bfast.com/bfast/click?bfmid=29150849&site id=39249818&bfpage=moneyyahoo4> To unsubscribe from this group, send an email to: doepfer_a100-unsubscribe@yahoogroups.com Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> . [Non-text portions of this message have been removed]