Doepfer

Hi, I bought the A-100BS2 in the 19" rack version which on reflection was a bad move. So I picked up the LC9 case second hand to swap the modules in to. Behind the A-190-1 there is what I think is a rectifier on the end of the bus but this is not present in the LC9 case. Do I transfer that as well as the modules?

Many thanks, Lee.

IT is probobly the 5volt converter needed for the 190-1 

Skickat från min iPhone

> 28 apr 2014 kl. 19:23 skrev <lee.janus55@yahoo.com>:
> 
> Hi, I bought the A-100BS2 in the 19" rack version which on reflection was a bad move. So I picked up the LC9 case second hand to swap the modules in to. Behind the A-190-1 there is what I think is a rectifier on the end of the bus but this is not present in the LC9 case. Do I transfer that as well as the modules?
> 
> 
> 
> Many thanks, Lee.
> 
>

> IT is probobly the 5volt converter needed for the 190-1 

To elaborate a bit, the 5V converter looks like this: http://www.doepfer.de/a100z_e.htm#AD5

You simply need to plug it into any free socket on the bus board, and it'll output +5V on the appropriate part of the bus.

All the best,
Zoë.