Doepfer

Hi

Would I be right in saying that the A-145 as the slowest cycle of the lfo's? - I am looking to create long filter sweeps.


Kind regards

Thank you very much for your reply - brilliant news.

--- In Doepfer_a100@yahoogroups.com, <yahoo@...> wrote:

>
> > Hi
> >
> > Would I be right in saying that the A-145 as the slowest cycle of
> > the lfo's? - I am looking to create long filter sweeps.
> >
> >
> > Kind regards
> 
> The slowest cycles can be obtained with the A-143-4 in the super-low mode
> (up to hours).
> 
> Best wishes
> Dieter Doepfer
>

> Hi
>
> Would I be right in saying that the A-145 as the slowest cycle of
> the lfo's? - I am looking to create long filter sweeps.
>
>
> Kind regards

The slowest cycles can be obtained with the A-143-4 in the super-low mode
(up to hours).

Best wishes
Dieter Doepfer

this come up often. I'm fairly sure you can change the timing cap on most LFOs to decrease or increase the speed.



On Aug 28, 2012, at 6:51 AM, "isoldeandisobelle" <isoldeisobelle@gmail.com> wrote:

> Hi
> 
> Would I be right in saying that the A-145 as the slowest cycle of the lfo's? - I am looking to create long filter sweeps.
> 
> Kind regards
> 
> 


[Non-text portions of this message have been removed]

> this come up often. I'm fairly sure you can change the timing cap 
> on most LFOs to decrease or increase the speed.

Right. Please refer to the corresponding document on our website:

www.doepfer.com > A-100 > DIY page >  Timing capacitors of A-100 modules

Best wishes
Dieter Doepfer

Just out of curiosity. Which LFO is the slowest out of these: A145, A146,
A147, A143-9 ?
And how does the A143-3 compare to those? The A143-4 is a bit out of my
league right now.

grtz,
Ernst



On Wed, Aug 29, 2012 at 9:43 AM, <yahoo@doepfer.de> wrote:

> **
>
>
> > this come up often. I'm fairly sure you can change the timing cap
> > on most LFOs to decrease or increase the speed.
>
> Right. Please refer to the corresponding document on our website:
>
> www.doepfer.com > A-100 > DIY page > Timing capacitors of A-100 modules
>
> Best wishes
> Dieter Doepfer
>
>  
>


[Non-text portions of this message have been removed]