But I am still not too thrilled by the idea of a compressor module. Then
rather a better/more accurate Envelope Follower!
On Thu, May 24, 2012 at 10:57 PM, achtung_999 <
heinrich.himmelwasser@gmail.com> wrote:
> You are right there James, but I mainly used this application to temper
> the feedback in feedback patches..
>
>
>
> On Thu, May 24, 2012 at 10:44 PM, <james.husted@mac.com> wrote:
>
>> **
>>
>>
>> The problem is of course that most Envelope followers are just not fast
>> enough to be used in a compressor - an accurate compressor anyway. The RMS
>> detectors in compressors are the main thing that characterizes one form
>> another and typically they are the parts that are encapsulated to slow down
>> their copying. You can still make a compressor with a Envelope follower but
>> I am sure you will always here it "breathe".
>> -James
>>
>>
>> On May 24, 2012, at 11:24 AM, achtung_999 wrote:
>>
>> > Oh and an envelope follower of course! (a119)
>> >
>> >
>> >
>> >
>> > On Thu, May 24, 2012 at 8:23 PM, achtung_999 <
>> > heinrich.himmelwasser@gmail.com> wrote:
>> >
>> >> It is quite easy to patch up a compressor with some Doepfer modules.
>> >> A VCA, a voltage inverter and a slew limiter should put you on the
>> way...
>> >> Go try!
>> >>
>> >> Happy patching!
>> >>
>> >> Ernst
>> >>
>> >>
>> >> On Thu, May 24, 2012 at 8:19 PM, Loren Nerell <lnerell@earthlink.net
>> >wrote:
>> >>
>> >>> **
>>
>> >>>
>> >>>
>> >>> Cwejman makes the VC-FC and VC-FCS Stereo Compressors. Like most
>> >>> Cwejman products its not cheap. You can check them out here:
>> >>>
>> >>> http://www.cwejman.net
>> >>> --
>> >>> Take care.
>> >>>
>> >>> - Loren Nerell
>> >>>
>> >>> ---------------------------
>> >>> www.lorennerell.com
>> >>> ---------------------------
>> >>>
>> >>>
>> >>
>> >>
>> >
>> >
>> > [Non-text portions of this message have been removed]
>> >
>> >
>> >
>> > ------------------------------------
>> >
>> > Yahoo! Groups Links
>> >
>> >
>> >
>>
>>
>>
>
>
[Non-text portions of this message have been removed]