Doepfer

Hello to everyone,
I read on the user's manual, module A-119 is designed to integrate audio signals to the A100 system.
I now work on the A100 bs2 which doesn't have this module. But as far as my exploration and comprehension have extended I imagine I can also use other ways to integrate such audio signals, such as the midi interface A-190. I also have in memory a tutorial by Raul Pena giving a demo of sample and hold of a mp3 recoding through the sample in of module A-148, and I wonder if I can do the same with the ring modulator A-114 although I don't have the A-119 ?
Best friendly regards to all of you,
Marc-Henri Arfeux

[Non-text portions of this message have been removed]

You certainly don't need an A-199 in order to integrate regular audio into your system.  You can just connect the output of any radio, hi-fi, etc to the input of, say, your filter module or reverb or whatever directly.  (Be careful with the volume!)  I find the A-183-3 helps get the levels right, depending on what you're hooking up, but even then you may not need it.

Experiment first, buy more modules only when that doesn't help. :)

Hope that helps,
Zoë.

> You certainly don't need an A-199

...or A-119, ahem.

Hi Marc-Henri,

 

et bon anniversaire a toi retrospectivement. 

 

Generally you can use any line-level signals without the A-190. Each module
with an 'Audio IN' port will accept those signal levels. Where the A-190
comes in is deriving both an envelope and a gate signal from the input. If
you were to connect for instance a guitar or a violin to the A-190 you could
not only process the audio (the violin sound) but also the amplitude (the
loudness of your violin) of whatever sound the A-100 produces. 

 

Y

 

  _____  

Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] Im
Auftrag von Marc-Henri Arfeux
Gesendet: Dienstag, 28. Februar 2012 04:32
An: doepfer_a100@yahoogroups.com
Betreff: [Doepfer_a100] A 119

 

  

Hello to everyone,
I read on the user's manual, module A-119 is designed to integrate audio
signals to the A100 system.
I now work on the A100 bs2 which doesn't have this module. But as far as my
exploration and comprehension have extended I imagine I can also use other
ways to integrate such audio signals, such as the midi interface A-190. I
also have in memory a tutorial by Raul Pena giving a demo of sample and hold
of a mp3 recoding through the sample in of module A-148, and I wonder if I
can do the same with the ring modulator A-114 although I don't have the
A-119 ?
Best friendly regards to all of you,
Marc-Henri Arfeux

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]