Doepfer

Ladies and Gents,

For those of you who may own Doepfer and Analogue Systems 
gear, I have published a sort list of extremely easy modifications 
for some of them which can be seen by going to:

http://www.allegrobikes.com/synth.html

Click on 'Son of Frankensynth", scroll down the page until you 
see a text link marked 'modifications', click there.

All list functional descriptions, show faceplate pictures of the 
mods and schematics (diagrams to some of you - you know who 
you are!).  As a precaution I did not include the schematic of the 
entire circuit, but only the mods for each.

And the mods  are:

1) Adding a Range Switch and End-Of-Cycle Pulse out to an 
Analogue Systems ADSR

2) Adding a VC input for the post delay on-timeof an Analogue 
Systems Gate Delay

3) Adding a Pulse Wave output to a Doepfer LFO (will work for 
any LFO that does not have such a jack).

4)  VC input for a DOD Flanger (this won't be up for a couple of 
weeks)

Soon, I will be posting descriptions (and some schematics) of 
my homebrew modules,  incuding my sequencer, voltage adder, 
voltage inverter, noise, AND/NAND gate, and the world's all time 
WORST design:  my CEM 3374 based LFO with programmable 
pulse outputs (allows you to start/stop the pulsing via buttons or 
trigger inputs).  So, if any of that interests you,  keep your eyes on 
the site as I am making updates for these real real soon.

As Chuck (dog) would say "chow',

best,

P