Doepfer

hello,

i am pretty new to this place, so let me introduce myself. i am from
hungary, and have always been keen on electronic music.
we have started a project to put together a MFOS 16 step sequencer,
which some of you might know well.
my intention is to SYNC my daw with the sequencer. for this, i find
that the doepfer msy-2 would be a good solution.

raymond from MFOS suggests that additional circuitry might be needed
to boost the clock signals amplitude:
http://www.musicfromouterspace.com/mfosweb/navigate.action?MAINTAB=SYNTHDIY&PROJARG=HOT_TIPS/gate_buffer.html

do you have any experiences in that situation? many thanks!

andrás

Hello Andras

The input option from Ray is not bad, but maybe a little overkill. I 
think, two simple transistor buffers (one for clock, one for 
start/stop-Gate) should be enough: BC549, 47k from MSY out to base, 
collector to +12V, emitter via 10k to ground, emitter via 1k to 
sequencer input.

Florian