Doepfer

Currently my two A-110's are kinda out of tune. I need to increase the "tune" knob on the second Osc by 3 cent to get them in tune. Is there anything I can do to fix this, not that it's a huge problem the Doepfer still sounds great.

Also the second Osc crackles when I apply very gentle pressure to the range knob. Again, not a huge problem (Both range knobs are a little wobbly to touch).

the tuning procedure is here

http://www.doepfer.de/a110_tec.htm

Paul

On 30 August 2010 18:33, heslop.jonathan <heslop.jonathan@yahoo.com> wrote:

>
>
> Currently my two A-110's are kinda out of tune. I need to increase the
> "tune" knob on the second Osc by 3 cent to get them in tune. Is there
> anything I can do to fix this, not that it's a huge problem the Doepfer
> still sounds great.
>
> Also the second Osc crackles when I apply very gentle pressure to the range
> knob. Again, not a huge problem (Both range knobs are a little wobbly to
> touch).
>
>  
>


[Non-text portions of this message have been removed]

Thanks Paul,

Looks fairly easy. I guess I just tune it against one of my digital synths. What size screw driver do I need to alter P7, P8 etc?

Jonathan



--- In Doepfer_a100@yahoogroups.com, phono 1337 <phono1337@...> wrote:

>
> the tuning procedure is here
> 
> http://www.doepfer.de/a110_tec.htm
> 
> Paul
> 
> On 30 August 2010 18:33, heslop.jonathan <heslop.jonathan@...> wrote:
> 
> >
> >
> > Currently my two A-110's are kinda out of tune. I need to increase the
> > "tune" knob on the second Osc by 3 cent to get them in tune. Is there
> > anything I can do to fix this, not that it's a huge problem the Doepfer
> > still sounds great.
> >
> > Also the second Osc crackles when I apply very gentle pressure to the range
> > knob. Again, not a huge problem (Both range knobs are a little wobbly to
> > touch).
> >
> >  
> >
> 
> 
> [Non-text portions of this message have been removed]
>

to be honest ive not a clue since i dont have one here :-)


<http://www.dinsync.info>

www.dinsync.info

On 30 Aug 2010 23:22, "heslop.jonathan" <heslop.jonathan@yahoo.com> wrote:



Thanks Paul,

Looks fairly easy. I guess I just tune it against one of my digital synths.
What size screw driver do I need to alter P7, P8 etc?

Jonathan



--- In Doepfer_a100@yahoogroups.com, phono 1337 <phono1337@...> wrote:
>
> the tuning procedure is...

> On 30 August 2010 18:33, heslop.jonathan <heslop.jonathan@...> wrote:
>
> >
> >
> > Currently my ...
> [Non-text portions of this message have been removed]
>

 


[Non-text portions of this message have been removed]