Doepfer

Thanks!
This....

center pos :  50% left signal and  50% right signal
fccw pos   : 100% left signal and   0% right signal
fcw pos    :   0% left signal and 100% right signal

is good for my purpose, I can only hope that the Nobels MV-C, box works the 
same, because I have already ordered it at thomann.

M


>From: "selfoscillate" <synaptic_music@yahoo.com>
>Reply-To: Doepfer_a100@yahoogroups.com
>To: Doepfer_a100@yahoogroups.com
>Subject: [Doepfer_a100] Re: A + (-B) = A - B ???
>Date: Mon, 13 Feb 2006 15:10:19 -0000
>
>--- In Doepfer_a100@yahoogroups.com, "Martin Rudling"
><martinrudling@...> wrote:
> >
> > Hello.
> > I just had a conversation with a music store in Stockholm, about my
> > connectors/intentions, which ended with the guy hanging up on me!
>He
> > couldn´t understand what I so ambitiously described to him, and got
>mad when
> > I tried to insist.
> >
> > So I will try with you guys.
> >
> > Using the A-134 VC-panning as reference, because it has what I will
>need as
> > a connector/adapter onboard. It has 3 outs, left right and MIX
>output. I
> > guess that this one acts like a crossfader as response for  panning
> > modulation. Which means: when PAN goes to RIGHT the LEFT volume
> > decreases/disappeares, and then the oppisite will procedure occurs.
>Other
> > words
> >
> > CENTER POS: ½L + ½R = 1       <<<ALT>>>        CENTER POS: L + R  =
>2
> > PAN RIGHT: 0L + R       = 1        <<<ALT>>>        PAN RIGHT: 0L +
>R  = 1
> > PAN LEFT: L + 0R         = 1        <<<ALT>>>        PAN LEFT: L +
>0R    = 1
> >
> > BINGO!!! Specially if the first alternative is the case (??), ((the
> > "swapping" application in mind, if the second alt is the case, i
>will manage
> > with a combined vol mod & panner, volume added as the panning
>leaves the
> > center))
> >
> > Problem: I have a module that does panning left-right, but it does
>not have
> > the MIX output (only regular L-R), can I create it by myself, by
>just
> > applying a stereo to mono adaptor as in the attached picture? Are
>the
> > signals mixed properly in this simple device, so that I gain a
>crossfader
> > out of a panner???
> >
> > Very thanks!
> >
> > Martin
>
>
>hello martin,
>
>first of all, you have to upload the picture to
>the files section. pictures in message posts will
>get deleted automatically.
>
>you cannot combine two outputs by using a simple
>adaptor, you have to use a mixer for this.
>
>regarding the a134, it does a linear crossfade
>between left and right input signal, so:
>
>center pos :  50% left signal and  50% right signal
>fccw pos   : 100% left signal and   0% right signal
>fcw pos    :   0% left signal and 100% right signal
>
>
>best wishes
>
>ingo
>
>
>
>
>
>