Doepfer

Don't know if this is possible, but if it will be 2 bbd's, wouldn't it be 
nice to have a hsvco-output and two clock inserts, one for each bbd, 
so you can e.g. insert the a-163. That way you can have 1/2, 1/3, 
1/4, 1/6, 1/8 etc. of the delay-time for each bbd without changing 
the 'master' delay-time parameter. 

On 20 Oct 2005, at 8:32, selfoscillate wrote:

> 
> hello florian,
> 
> i had that idea for two bbd-chips on one module
> because i think this enables the user to obtain
> delay, chorusing and flanging with only one module,
> so there is no need to decide which one should buy,
> because the module does it all.
> different outputs are not expensive to add and probably
> give nice stereo effects. after all a module with two
> bbd's will be cheaper that two separate modules,
> and it will keep dieter from offering two modules,
> which will further lower the price.
> 
> i can see that two modules offer even more possibilities,
> but nothing keeps us from buying two modules anyway.
> 
> best wishes
> 
> ingo
> 
> 
> 
> --- In Doepfer_a100@yahoogroups.com, Florian Anwander 
> <Florian.Anwander@c...> wrote:
> >
> > Hi Bakis
> > 
> > Hmm, sorry; perhaps now I spoil ingo's suggestion, but I think it 
> would 
> > be a waste of ressource.
> > If I have two BBDs, I want to modulate their clock from different 
> > modulation sources in 80 percent of all cases. Lets take as example 
> the 
> > famous Roland chorus, which is two BBDs whereone is modulated 
> direct by 
> > the LFO the other by the inverted LFO signal.
> > 
> > Either I'd like to have two separate modules or at least one module 
> with 
> > two separate delaylines. There are a lot of famous BBD-based 
> devices 
> > like the Dynacord TAM-21, the A/DA or the Roland Dimension-D. At 
> the 
> > moment these examples look like the targets of a possible Doepfer 
> > BBD-module, but they should be the starting point from where a 
> > developement goes further on.
> > 
> > Florian
> > 
> > 
> > Bakis Sirros wrote:
> > 
> > > hello dieter,
> > > ingo's idea of putting two different stages BBD's into
> > > each module is great.
> > > as i always say, the more capabilities, sockets and
> > > knobs in a module, the better.
> > > best regards,
> > > bakis.
> >
> 
> 
> 
> 
> 
> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 
> 
> 
>