Doepfer

Hello again. Got a few useful comments since my post yesterday 
concerning my system-planning with a goal of what I called 
a "rythmic-tremolator". Thanks for this. More comments are of course 
very appreciated. Today´s further investigating has resulted in the 
system plan attached below. Regarding filters I have been attracted 
to the idea of adding even more filters than I initially had 
planned. It´s nearly impossible to understand which combinations 
that are good, so in that section I have exposed 3 different 
alternatives, two of them containing 2 fltrs and one with tree. I 
also put two fltrs between () symbols to mark that I might, (just 
might (it´s also a matter of space) afford these also. As you will 
see they appear in combination with the "multitype morphing fltr", 
and this is because of the price of it. Comments are welcomed!!! (in 
every part of the planning).

(I have not measured the size these modules will use yet.)

Here we go:


 

A110 Oscillator10TE

 

A106-1 Extreme filter/// A106-1 Extreme Filter/// A108 LP/BP filter

A121 Multimode filter/// A107 Morphing Filter/// A107 Morhing filter

A124 Wasp filter/// (A124 Wasp fltr)/// (A 106-1 Extreme fltr)

 

A131 VCA 8TE

A131 VCA 8TE

A132 Dual VCA

A132 Dual VCA

A134 VC Panning 8TE

A134 VC Panning 8TE

A136 Distortion Waveshaper 8TE

A135 VC mixer /// A138A Mixer 8TE (linear)   (((suggestions?)))

A138b Mixer (exponential)

A138c polarizing mixer

A145 LFO 8TE

A143-2 Quad ADSR 

A160 Clock divider

A161 Clock sequencer

A163 VC clock divider

A180 Multiple 4TE

A180 Multiple 4TE

A190 Midi-CV10TE 

 1xBlind plate 2TE