It's very difficult to choose. I looked at both your first system and the sound processing system you've put together (actually I revisited the list several times...) and pulled several ideas from it. The main difference from your first system is the 3 VCO2's - I'd love more than one VCO - but I'm focusing more on sound processing vs. synth functions. I think the advice I'm looking for most from people on the list is where I may have chosen something that if I swapped it out for module 'x' - I'd have a lot more flexibility. For example - if the mixer would be more handy than one of the VCA's. In an ideal world - I'd just fill up my server cabinet with racks... ;) If I love this thing as much as I think I will - I wouldn't be surprised if I fill up this rack quicker than planned and start thinking about a 2nd one... but for now - I'm taking small steps. I'm planning a rack instead of portable case. I went round and round on that one and my wife had the best question - how often will you want to take it out to play a gig... twice in the next ten years? In reality, she's probably right. All the people I loved to jam with have moved away and I "retired" from bar gigs back in '98 (13 years on and off was enough...). My last couple of electronic/ambient gigs I focused more on bass playing - it's a great instrument to jam with and when I'm playing with a couple of great ambient/textural synth players... adding bass rounds things out so nicely. Then again - I process my bass into oblivion on some tracks. I'll do some more gigs, probably up in Chicago - but the Doepfer might not make the trip. The rack... I have a great old IBM 4997 server cabinet in my studio - my wife's work was throwing it away - could have kept the computers in the rack also... but... I didn't. Sort of the perfect thing to be able to open up the door and have a great mass of knobs and cables... The A-108 and A-102 were also in the running for the 2nd filter. I could get the A-108 in by dropping the little dual VCA and the WASP. I tried to pick as many of the VC versions of modules as possible. The Wave Multiplier is in there because a number of people recommended it for sound sculpting. I've been wanting a spring reverb back in my setup since I sold my old Peavey 6 channel head years and years ago - nothing like running something through it - with the out of the reberb back into a channel for controlled feedback - and then smacking the head to get the reverb rattling (not that I'm really planning to smack my Doepfer rack around...) Speaking of controlled feedback - it's one of my favorite things - I love the idea of the feedback input. All of my current effects units are setup to go back into channels on my mixer to create feedback loops. I should mention I love to use it fairly subtly - it appears in a lot of my music - but not in a screeching 'feedback' sort of way... Anyway - yes - I'll be bugging Shawn some more when he's back from vacation. I'm not ready to toss my credit card at them just yet - but it'll be fairly soon. A hopefully decent bonus check coming up should make it a bit easier... we'll see... :) Thanks again for your input! jkn sfrules wrote: > >JKN, > >Looked over your layout - looks good. >Not the modules I would have chosen, but >it's great that you can choose exactly what >suits you! > >If you have any doubts about the WASP filter, >I highly recommend the A-108 VCF. 4 different >LP slopes available simultaneously and a fine BP, >Plus it has VC Resonance. Regrettably it is 4 HP >wider. > >If you are thinking of putting in a mixer - I >recommend the A-138c. If you invert and mix >you can use it to turn BP filtering into Notch, >and LP filtering into HP. Or you can mix inverted >waveforms from the same VCO to subtract harmonics. >Or invert the sine and mix it with any of the other waves >to subtract the fundamental. > >Shawn may have a few words to say about which of the >three smaller mixers is best for our needs. I take his >recommendations seriously. (Although it is too late for >my suitcase.) > >And while on that subject. are you putting this combination >into a suitcase? If so, be prepared for some interference >from the power supply. Or, if you find NO interference, >by all means let us know!!! > >You're gonna have some fun! > >sfrules > >
Message
Re: [Doepfer_a100] System Planning - a few more questions
2005-04-05 by jkn
Attachments
- No local attachments were found for this message.