Doepfer

Hello!

I would like to see a CV input for the 2nd function (time between the
pulses in the 
pulsetrain). That would actually make it a way more valuable
generator!!

Greetings,

Ernst 





--- In Doepfer_a100@yahoogroups.com, Doepfer_a100@yahoogroups.com
wrote:
> 
> 
> Enter your vote today!  A new poll has been created for the 
> Doepfer_a100 group:
> 
> Would you like doepfer to manufacture 
> a Clap/crack generator module? the 
> features it could have are the 
> following: 
> -Trigger in (starts pulse train)
> -Trig speed knob (time between pulses 
> in the pulse train)
> -Trig speed cv
> -Decay time (this is for the eg, so 
> it's for each trigger not the total
> output)
> -Retrig knob (controls number of 
> pulses in the pulse train, say between 
> 3
> and 8?)
> -Clap gen output (outputs the EG out)
> -End of trig out (gets a trigger, or 
> gate I guess, one trigger after the
> last one in the pulse train as set by 
> the retrig knob. Ie, you set retrig
> knob to 3 and the pulse train actually 
> makes 4 pulses, the first three
> fire the decay eg and the last one is 
> sent to the end of trig out. This is
> for the extra mile in clap synthesis 
> of having the last eg trig be longer
> decay/release, it'll let you fire off 
> an external eg for this.) 
> 
>   o yes! 
>   o maybe 
>   o no 
> 
> 
> To vote, please visit the following web page:
> http://groups.yahoo.com/group/Doepfer_a100/surveys?id=11994385 
> 
> Note: Please do not reply to this message. Poll votes are 
> not collected via email. To vote, you must go to the Yahoo! Groups 
> web site listed above.
> 
> Thanks!