Doepfer

--- Dieter Doepfer <hardware@doepfer.de> wrote:
> From: "Dieter Doepfer" <hardware@doepfer.de>
> To: "Bakis Sirros" <synth_freak_2000@yahoo.com>
> Subject: Second PSU
> Date: Thu, 31 Jul 2003 13:54:27 +0200
> 
> > Hi,
> >
> > when I had the A-129 vocoder (129/1 and 129/2) 650
> mA wasn�t enough for
> > my G6 case. I tried to run it with around 700mA,
> but then the VCOs were
> > quite unstable. So a PSU with like 900mA - 1A
> would be nice.
> >
> > Paul
> 
> One could install another power supply on the second
> back panel that is
> normally unused (only used if a +5V power supply is
> installed). The second
> power supply is then used for the upper bus board
> and the already existing
> power supply for the lower bus board.
> 
> Your module collection is one of the few cases that
> the 650 mA PSU is not
> sufficient.
> 
> Best regards
> Dieter Doepfer
> 


=====
synthfreak(parallel worlds)
athens-greece
[Doepfer_a100] group owner

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com