Doepfer

hello,

yes i would also prefer a switch instead of a jumper.
as we can see with the a127, users start adding those switches,
because jumpers are not practical.

regarding the a154, i think most people who vote here always want
the solution with a maximum of possible features.
my personal opinion is, that this is not a bad thing.
it will give more possibilities, even if these possibilities
are rarely used in the end.

best wishes

ingo



--- In Doepfer_a100@yahoogroups.com, David Salter <david.salter@r...> 
wrote:
> Bakis
>  
> Two thoughts;
>  
> Is there another forum that Dieter gets feedback from?
>  
> If there is going to be a jumper to change osc modes on the A154, 
why
> not install a switch (apart from a little extra cost) then it's more
> flexible.
>  
> Regards
>  
>  
> 
> David Salter 
> 
> Tel: +44 20 7542 2402 
> Mob: +44 7990562402 
> Fax: +44 20 7542 2699 
> 
> 	-----Original Message-----
> 	From: Bakis Sirros [mailto:synth_freak_2000@y...] 
> 	Sent: 10 June 2003 13:21
> 	To: Doepfer_a100 group
> 	Subject: [Doepfer_a100] info from doepfer about the 
development
> of the A107 and the A154.
> 	
> 	
> 	DOEPFER SAYS:
> 	"we still have some (minor) problems with the A-107
> 	(not with the module generally but with the slew
> 	limiting function). The pure hardware slew limiter is
> 	working now but now the disadvantage is that there is
> 	no display if the module is still morphing to the new
> 	filter or if the new filter is already reached. As
> 	long as the slew function was under software control
> 	the microcontroller "knew" if the slew/morphing had
> 	been finished. So we will try another way: combined
> 	soft/hardware slew limiting, i.e. the software has the
> 	main control over the slew function and the additional
> 	VC hardware slew limiter only irons out the small
> 	steps caused because of the 8 bit resolution of the
> 	DAC that is used for the VCA control. I will keep you
> 	informed about the proceedings.
> 	Consequently I cannot confirm that the A-107 will be
> 	available in August as we still have to find the final
> 	solution for the 100% smooth slew function with
> 	display. As soon as we have tested the combined
> 	soft/hardware slew function I can tell you more.
> 	
> 	Thanks for the poll results. The SOU result was not
> 	very surprising. But the VC first/last step for the
> 	A-154 was really unexpected as it differs completely
> 	from the suggestions of other A-100 users (not members
> 	of the Yahoo group). Most of these users suggested
> 	answer b (only VC last step in all non CV addressed
> 	modes) but no d (2 additonal CV inputs). We will
> 	discuss in the company the results and see if we
> 	really add the additional CV inputs for first/last
> 	step. If we would have only the response from the
> 	Yahoo group there would be no question and we would
> 	simply add the CV inputs. 
> 	For the oscillator mode we think about another
> 	solution: a jumper on the pc board so that the user
> 	could select between the two versions.
> 	
> 	Best wishes
> 	Dieter Doepfer"
> 	
> 	
> 	
> 	SO...MEMBERS, KEEP ON VOTING FOR THE SOU MODULES AND
> 	THE A154!!!:-)
> 	BAKIS.
> 	
> 	
> 	
> 	=====
> 	synthfreak(parallel worlds)
> 	athens-greece
> 	[Doepfer_a100] group owner
> 	
> 	__________________________________
> 	Do you Yahoo!?
> 	Yahoo! Calendar - Free online calendar with sync to Outlook
(TM).
> 	http://calendar.yahoo.com
> 	
> 	
> Yahoo! Groups Sponsor	
> 
>  
> 
<http://rd.yahoo.com/M=247865.3355058.4641699.1261774/D=egroupweb/S=17
05
> 032144:HM/A=1482387/R=0/SIG=16nu6799b/*http://ads.x10.com/?
bHlhaG9vaG0xL
> mRhd=1055247680%
3eM=247865.3355058.4641699.1261774/D=egroupweb/S=1705032
> 144:HM/A=1482387/R=1=1055247680%
3eM=247865.3355058.4641699.1261774/D=egr
> oupweb/S=1705032144:HM/A=1482387/R=2> 	
>  
> <http://us.adserver.yahoo.com/l?
M=247865.3355058.4641699.1261774/D=egrou
> pmail/S=:HM/A=1482387/rand=280600123> 	
> 
> 	To unsubscribe from this group, send an email to:
> 	doepfer_a100-unsubscribe@yahoogroups.com
> 	
> 	
> 	
> 	Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service <http://docs.yahoo.com/info/terms/> . 
> 	
> 
> 
> 
> --------------------------------------------------------------- -
>         Visit our Internet site at http://www.reuters.com
> 
> Get closer to the financial markets with Reuters Messaging - for 
more
> information and to register, visit http://www.reuters.com/messaging
> 
> Any views expressed in this message are those of  the  individual
> sender,  except  where  the sender specifically states them to be
> the views of Reuters Ltd.
> 
> 
> 
> [Non-text portions of this message have been removed]