Yahoo Groups archive

Doepfer

Index last updated: 2026-04-29 00:15 UTC

Message

Re: Module Advice for Initial System

2003-03-11 by John

<andreas.k.lindholm@t...> wrote:
> First of all I would advice you to be unfaithful. I feel the 
> same as Bakis.
I do plan to head this way after I get the initial system established.


> As for Doepfer I would advice you to pick up a
> a129/3 which is great for many things and not just as a part of 
> the vocoder,
Hmmm, this was on my list for phase II, but perhaps I should consider 
moving it up the chain  :-)


> then of course the a136 is real special. And futher 
> more I would go for the soon upcoming superfilter a107.
I'll certainly investigate these.  Thanks for the advice.


> For my own part I began buying Doepfer just beacuse back in -95 I 
> didn't know any other alternative for expensive secondhand moogs 
> and rolands and the ever so expensive Serge. Now the case isn't so 
> clear anymore with analog systems, motm, and synthesizer.com (which 
> I might prefer today if I would start all over due to the bigger 
> jacks and general build quality).
Glad you brought up the subject of build quality...I don't intend to 
take my A100 out live very often.  Do you think I should be ok in 
this respect?  Ive heard some things regarding the A100 build quality 
I've never personally had a bad experience any of the other Doepfer 
gear I own.


> As for shaltwerk I wouldn't go that way myself... The "werks" are 
> in my opinion a bit of a forgotten case of doepfer gear. 
Does that mean it's discontinued or Dieter doesn't support it any 
longer?  It always seemed to be a great piece of gear for hands-on 
sequencing.


> I think you will be better off with the A155. But by all means 
> don't just take my advice on that one I am more than a bit biased 
> on that part.
This might be very good advice.  I'll investigate this as well.  But 
you must admit the Shaltwerk does have lots of pretty lights!  :-P

Kindest regards,
John

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.