Doepfer

hi joe,
about your sync problem...i use the clock output of
the a190 to sync my a155.and the "problem" that i have
is that the a155 allways starts from the second
step.(of course i have the reset out of the a190
connected to the input of the a155...).i sync my a155
to my old atari st.but it's not a real problem as it
allways starts from the second step,everything else is
o.k..it might be that i have my a190 connected to midi
with my atari after a very long midichain.
why don't you use the clock out of the a190??
bakis.

--- buechlerjoe <buechlerjoe@toadmail.com> wrote:
> I tried out the Shepard generator when I first got
> the A191, but I'm 
> sorry not to have any creative thoughts regarding it
> - I haven't 
> switched the A191 to Shepard mode since then. The
> Midi/CV sockets and 
> the Midi-synced LFOs are far too useful to me. I
> consider the A190/191 
> to be a single integrated Midi interface, and I
> can't imagine trying 
> to get by with just the A190 alone.
> 
> A thought occurred to me about my sync problem. My
> previous master 
> clock source might have been confusing the A191 in
> some mysterious 
> way, sometimes leaving it in phase, sometimes out of
> phase. Perhaps it 
> was in the "out of phase" state when I switched over
> to the Regelwerk. 
> I'm going to temporarily re-connect the original
> clock source, and try 
> to get the A191 back to the "in phase" state. If
> that doesn't work, 
> I'll directly email Doepfer about the problem.
> 
> Joe
> 
> --- In Doepfer_a100@y..., bakis Sirros
> <synth_freak_2000@y...> wrote:
> > hi and wellcome to the list!
> > i wish i could help but,i don't have an a191...
> > by the way,as you have this module,tell us ,have
> you
> > used the shepard generator??any creative
> thoughts??
> > synthfreak
> 
> 



=====
synthfreak(parallel worlds)
athens-greece
[Doepfer_a100] group owner-moderator

__________________________________________________
Do You Yahoo!?
Send your FREE holiday greetings online!
http://greetings.yahoo.com