Doepfer

another positive point is the ability to use the A155 as a stand 
alone multi-segment envelope generator in one shot mode. you could 
use the A147 as a tracking lfo from the keyboard voltage to scale the 
envelope shape and the keyboard gate to reset it's initial start 
point.

RM


--- In Doepfer_a100@yahoogroups.com, Bakis Sirros 
<synth_freak_2000@y...> wrote:
> hello psm,
> i agree with you 100%.
> bakis.
> 
> 
> --- "ps_minor <pscottm@h...>"
> <pscottm@h...> wrote:
> > --- In Doepfer_a100@yahoogroups.com, "James Husted" 
> > <james@e...> wrote:
> > 
> > > 
> > > I agree with this 100%. The idea of having the
> > section of the 
> > a155 not being
> > > used is troublesome.
> > 
> > 
> > well, i see your point but unless i'm mistaken,
> > looking at my 
> > a155, only 4 sockets will be disabled by connecting
> > to an a154, 
> > (start, stop, clock, and reset).  what's the big
> > deal?   
> > 
> > imho, the amount of space wasted by adding a 154 to
> > a 155 is 
> > negligible, 2 sq inches (approx 14 sq cm) of face
> > plate area.. 
> > was curious so i measured.   to me, the new gains of
> > adding an 
> > a154 far outweigh this loss. 
> > 
> > i think the a100 as a whole is a marvel of
> > features-per-sq-inch 
> > as it is, so this loss of 4 sockets on one module
> > (only when 
> > combined w an expander module) is not a problem.  
> > 
> > however, if this issue caused loss of potential HP
> > space i may 
> > think differently.  
> > 
> > the way i see it, shortening the a155 to do away w
> > the unused 
> > control section will not give you any HP space.  the
> > glide ouputs 
> > and s&h outputs are positioned right below the
> > would-be 'dead' 
> > control section. 
> > 
> > -psm
> > 
> >  
> > 
> > 
> > 
> > 
> 
> 
> =====
> synthfreak(parallel worlds)
> athens-greece
> [Doepfer_a100] group owner-moderator
> 
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
> http://mailplus.yahoo.com