Doepfer

We handed over a few prototypes of the A-180-9 to customers who use the
A-100 very intensively (live on stage and in the studio) before we started
the production to find out if there may occur any crosstalk or voltage loss
problems. Even worst-case scenarios were tested (e.g. 15V gate signals and
audio signals over a 2m cable) and none of the testers reported any
problems.

And the connection includes a common GND provided that network cables with
shield are used (see my other answer in this regard).

Best wishes
Dieter Doepfer




> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
> Gesendet: Samstag, 30. Dezember 2017 23:13
> An: Doepfer_a100@yahoogroups.com
> Betreff: Re: [Doepfer_a100] A180-9 multicore
>
>
>
>
> Not related to this issue, but will there be a problem because of
> the use of twisted pairs? Couldn't patching a 'noisy' signal in
> the same pair as, say, a 1V/Octave for a VCO, or with an audio
> signal lead to possible issues?.
>
> Also surprised that as an inter-system connector, that it does
> not provide a common ground connection
>
> Best Regards
>
> Laurie Biddulph
> Mobile.......: +61 0400 257 645
> Phone.......: +61 02 4340 0938
> Skype.......: widgetoz
>
>
> ELBY Designs
> 9 Follan Close
> Kariong
> NSW 2250
> Australia
> ABN: 70 022 727 605
>  2017 - Year of the EuroSerge Rooster
>
> On 30/12/2017 10:43 PM, Jacco Ville jaccoville@yahoo.com
> [Doepfer_a100] wrote:
>
> Seems there are cross-cables also....
> I’m not very familiar with CAT cables but when this module was
> introduced I took a small dive into this kind of connections
> because the provided cable is a bit short.
>
>
>
> Sent from my IPhone.
>
> Op 30 dec. 2017 om 11:31 heeft Neil Kagan nkagan@mac.com
> [Doepfer_a100] <Doepfer_a100@yahoogroups.com> het volgende geschreven:
>
>
>
> Do they use a cat5e or cat6 cable? The connector will be the same.
>
>
> Neil
>
>
> Sent from my iPhone
>
> On 30 Dec 2017, at 09:53, Jonathan jss9h@aol.com [Doepfer_a100]
> <Doepfer_a100@yahoogroups.com> wrote:
>
>
>
> Hi everyone. Almost Happy (Christian) New Year. I bought myself a
> pair of the new multicore modules as a Xmas treat (how incredibly
> useful in a large system Dieter - amazing that no-one has thought
> of it before). I have a very odd problem - The modules link
> perfectly with the cables supplied but they are only very short.
> When I try any other network cables however nothing seems to
> connect. I have checked the cables by linking my laptop to the
> router and that works fine, but I get no connections at all when
> I use them between the A180-9s. One of them is 1m long and two
> are 3m. Any suggestions please?
> Jonathan
> >From my iPad Air
>
>
>
>
>
>