Doepfer

Sorry I was wrong in the description of the problem, forget it. 

My worry here concerns the fact that a (not original) 1000mA transformer is used for a (supposed) 1200mA power supply. I say “supposed” because I don’t know whether this case came with a lower supply mA value than today’s model (the original Doepfer transformer installed today delivers 2400mA).

So, the PSU and the board are original Doepfer, the external transformer is not.

Do you think this might cause issues to the power supply, the board or the modules?

The link describes the not original transformer..

http://www.velleman.eu/products/view/?country=fr&lang=en&id=365838 <http://www.velleman.eu/products/view/?country=fr&lang=en&id=365838>

Since I already own this case with 1200mA and the original ext. transformer (2400mA), would be technically possible to use this original transformer for both cases at the same time?

Best,
dxx



> Il giorno 18 giu 2017, alle ore 22:47, Diego Ragnini <diegora@free.fr> ha scritto:
> 
> Hi everybody
> 
> A guy sells a second hand 2,5 years old A-100 LC3 of 1000mA, with a PSU which is not the original one. Apparently it had few issues and decided to replace it for not clearly specified reasons. He forwarded me the link for this PSU 
> 
>  http://www.velleman.eu/products/view/?country=fr&lang=en&id=365838 <http://www.velleman.eu/products/view/?country=fr&lang=en&id=365838>
> 
> I would be glad if someone could confirm the compatibility with the Doepfer system. He states that everything works flawlessly with it. I am surprised to know about issues on the original transformer for this unit, which I own in the new version (1200mA) and cannot find anything to complain about its PSU, absolutely sturdy and reliable.
> 
> Best regards,
> Diego