Hello Dieter, you may have a look at the old Korg X-911 guitar synth. It provides a quite reliable tracking. I can send you the schematics and may borrough you my X-911 too. The created CV is V/Hz, but a conversion to V/Oct should be doable. Florian Am 10.03.2016 um 13:25 schrieb yahoo@doepfer.de [Doepfer_a100]: >> The only Eurorack module I know until now is the Analog Solutions RS-35, >> which is out of production unfortunately. >> >> I assume Dieter will tell something about the state of the A-195-1. >> >> Florian > The module is still in the "holding pattern". The problem is to derive a clean rectangle signal from the input signal under (nearly) > all conditions. Measuring the frequency of the rectangle and generating the CV is then simple. But especially during the attack > phase and for signals without (or low level) fundamental it's difficult if not even impossible without a DSP. For steady signals > with a strong fundamental it's easy to derive the CV. Maybe we will release it some day "as it is" and mention the drawbacks. > > Best wishes > Dieter Doepfer > > > > ------------------------------------ > > ------------------------------------ > > > ------------------------------------ > > Yahoo Groups Links > > >
Message
Re: [Doepfer_a100] Pitch to CV module?
2016-03-10 by Florian Anwander
Attachments
- No local attachments were found for this message.