Doepfer

> hi Dieter! thank you from my heart for taking the time to answer to me.
> i followed your intructions and checked the board; i can't see the labels for gate/cv, but i compared my module to this photo
> http://www.doepfer.de/A100_pictures/doepfer_a190.jpg
> [how great is that you have photos of the boards on the doepfer site!]
> and it seems that in my module, there is a resistor at the right place.
>
> i posted a photo of my module so you can verify that i'm not mistaken:
> https://groups.yahoo.com/neo/groups/Doepfer_a100/photos/photostream/lightbox/1058788174?orderBy=mtime&sortOrder=desc&photo
> Filter=ALL#zax/1058788174
>
> so, as not to bother you again with the subject, if my module is indeed a later model, i can send midi data through the
> A190-1 and at the same time send gates from LFO, or cv/gate from external units [for example, a Roland MC202 sequencer]
> with no fear of damage
>
> again thanks + respect
> Yiannis.

Obviously the gate connection of your module to the bus is made already with a 220 Ohm resistor. So it's one of the newer modules.

If you want to combine gate or trigger signals the A-186-1 Gate/Trigger Combiner should be used. As a rule outputs should not be
connected because it's generally not a good idea to short outputs. In most cases nothing can be damaged within the A-100 but the
results are unpredictable. For the combination of audio or CV signals mixers (A-138) should be used, for Gate/Trigger the above
mentioned A-186-1 (or also mixers).

Best wishes
Dieter Doepfer