Doepfer

Just tried a couple of cables, same results.  Most are "official Doepfer" , the rest are generic eurorack cables from a reputable source (Analogue Haven).  No 1/8" stereo cables in my set up.

Grounding could very well be a potential cause.  When I'm finish with work for the day, I'll try pulling these off the shelving to a different surface.  I'll also check for any loose wires from other systems which may be touching one of the machines /shelves in back. It's be great if this turns out to be the problem as my road cases start arriving this week. (goodbye shelving with desktop racks!)


 


     On Wednesday, July 1, 2015 9:17 AM, "Nicholas Keller maq163x2@gmail.com [Doepfer_a100]" <Doepfer_a100@yahoogroups.com> wrote:
   

     I agree.  Try a different cable.  Perhaps yours has a short or is otherwise unfit.  I'd be surprised if you had used the same cable for all troubleshooting, but the same type...perhaps.



On Wednesday, July 1, 2015, Florian Anwander fanwander@mnet-online.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:

     Do you use original Doepfer patch cables?

This sounds like a missing ground connection between the two racks 
(which is normal!). In this case the patchcable has to provide a proper 
ground connection. Using cables with stereo-mini-jacks will not work! 
You must use cables with mono jacks on both sides.

Florian