Doepfer

Hello

As far as I know the DIY synth and the DE2 are quite similar (if not 
equal). The only difference I find is the clipped Saw at the DE2



@Christian: Your impression that the DE1 is beefier than the DE2 should 
be caused mainly by the circumstance, that the DE2 uses a exponential 
VCA for the Envelope, while the DE1 uses a linear VCA.


Of course there everyone can use any type of VCA he wants. But to my 
opinion the VCA for the loudness envelope should be linear, since the 
envelope itself has an exponential curve already.
Exponential VCAs are intended for linear control voltages like LFOs or 
velocity.

Florian

Am 01.05.2015 um 19:11 schrieb christian ienni ienni23@yahoo.com 
[Doepfer_a100]:
> i'm not Dieter (sorry ^_^ ), but as i understand it the various DIY
> synth possibilities are more or less based on the circuitry of the A100.
> the Dark Energy 1 is based almost entirely on a single Curtis chip,
> basically and entire synth voice on one chip (it was originally used in
> the Sequential Circuits Six-Track & Max early multitibral synths from
> the mid-80s) - this chip is no longer made and became so rare that's why
> Dieter had to discontinue the DE1 and completely redesign the voice
> circuit for the DE2.