Doepfer

Ok that's odd then - without changing the jumper on the A-190-3, it didn't have an immediate effect of resetting either of the delay or lfo inputs. As soon as I changed the jumper it works fine. I haven't measured the voltage coming out of the 190 as I assumed it must be 5v?

Neil

Sent from my iPhone

On 18 Mar 2015, at 08:33, yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:

>> OK, so I have just installed the A-147-2 and it’s pretty cool so far. Took me some time to get my head around the
>> internal patching and once I worked out that both the LFO reset and Delay rest needed me to adjust me A-1190-3 Gate level
>> from +5v to +12v all was working well.
>> 
>> Dieter it might be worth noting that the reset level on these inputs needs to be quite high in order to reset to 0v (last
>> least this was the case for me). Also, red LED’s would have been fine I think, as it is rather odd when none of the other
>> system LEDs change colour on the negative sweep, and none of my other modules have green or blue lights. Mainly this
>> affects how I see my system aesthetically, and others may disagree!
>> 
>> Overall a lovely new module though, well done to you and your team :)
>> 
>> Neil
> 
> Hello Neil,
> 
> thank you for your comments. A +5V level should reset to 0V. The LEDs with different colours are based on suggestions of many
> customers. But of course it's a matter of taste.
> 
> Best wishes
> Dieter Doepfer
> 
> 
> 
> ------------------------------------
> 
> ------------------------------------
> 
> 
> ------------------------------------
> 
> Yahoo Groups Links
> 
> 
>