Yahoo Groups archive

Doepfer

Index last updated: 2026-04-29 00:15 UTC

Message

Re: AW: AW: [Doepfer_a100] A-156 Dual Quantizer Transpose issue

2015-03-13 by karelvanbezooijen@yahoo.com

OK.

I did some measurements. When zero volt applied to the Transpose CV I read exactly 0.00 volt at pin 7.
When 1 volt applied I read 0.470 volt, when two volt applied I read 0.942.

So the TL062 is OK?

Can I replace the PIC by myself? (meaning reading the code and burn it to a new one?)

Best regards,

Karel.

Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.