Dig into this topic at Muffwiggler, it will most likely answer all your questions:
https://www.muffwiggler.com/forum/viewtopic.php?t=73618&start=all&postdays=0&postorder=asc
Ernst
https://www.muffwiggler.com/forum/viewtopic.php?t=73618&start=all&postdays=0&postorder=asc
Ernst
On Thu, Mar 5, 2015 at 12:10 AM, achtung_999 <heinrich.himmelwasser@gmail.com> wrote:
You mean the A171-2 I presume?
ErnstOn Wed, Mar 4, 2015 at 11:56 PM, yahoo ctujoao@yahoo.co.uk [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:Hello,
I’ve tested a make noise math and any waveform above 200/300Hz get transformed to something more “triangular” even with both slew parameters set to 0 (very obvious with a sine).
I’ve got a A-170 and it’s definitely not the case: what goes in, come out unmodified if the slew is at 0. That’s what I like about it.
So does the 170-2 have the same behaviour as the maths (modifying the incoming signal)?
Is it the same type of circuitry that will lead to this behaviour?
Thanks.
------------------------------------
------------------------------------
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Doepfer_a100/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Doepfer_a100/join
(Yahoo! ID required)
<*> To change settings via email:
Doepfer_a100-digest@yahoogroups.com
Doepfer_a100-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
Doepfer_a100-unsubscribe@yahoogroups.com
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/