Doepfer

> BTW I see the 8 CV inputs are factory configured. Anybody know how easy it is to make them all just CV inputs, no foot
> controllers etc?

If you are familiar with electronics that's possible but a lot of work. You have to interrupt the signal that leads from each
potentiometer to the measuring input of the ADC-unit and replace it by a socket for the external CV. And you have to make sure that
the external voltage is in the range 0...+5V (i.e. a protection circuit for each input). Negative voltages and voltages beyond +5V
will destroy the electronics. If you only need the CV-to-Midi function (i.e. no potentiometers and the housing) I'd recommend the
DIY/OEM products Pocket Electronic or USB64. If you want a module I'd recommend the A-192-1.

Best wishes
Dieter Doepfer