Doepfer

hi Dieter! this reminds me of a tangential question i've had for a while: is it possible to connect a Dark Energy and Dark Time the same way, via internal jumpers/wired through the side holes? i've been considering bolting them together as a single unit, but if it still needs an external midi cable then i might not bother. -chris

      From: "yahoo@doepfer.de [Doepfer_a100]" <Doepfer_a100@yahoogroups.com>
 To: Doepfer_a100@yahoogroups.com 
 Sent: Friday, January 9, 2015 3:58 AM
 Subject: AW: [Doepfer_a100] Connecting two dark energies
   
> Hi there
> 
> From the technical infromation of the dark energy it says:
> 
> 
> 
> "To connect two Dark Energy's via Midi JP5 of the first unit has to be wired to JP6 of the second unit. Asuitable link 
> cable is available soon. Pay attention to the correct polarity of the cables (GND?GND andhot pin?hot pin). If the 
> polarity is wrong nothing can be damaged but the link function will not work. Thelink cable is fed trough the holes in 
> the side plates of the case. If a wooden side plate is used between thetwo units the side plate has to be drilled in addition"
> 
> 
> I was wondering, what this suitable cable is? It's just a cable that connects to pins? I'm guessing these are quite 
> generic but do they have a name?
> 
> 
> thanks

The cables just connect two pins are included with each Dark Energy.

But an external Midi thru box with 2 outputs does the same job.

Best wishes
Dieter Doepfer



------------------------------------

------------------------------------


------------------------------------

Yahoo Groups Links