Doepfer

I prefer the normalized version of the connection myself because this allows to easily dis-connect the VCO from the bus when wanted. I often do this when using the Buss Access modules on a cabinet with more than one "receiver" from the bus. Often a situation will come up where you want to NOT have the VCO transposed by another signal on the bus. It also adds to some confusion when you have a VCO changing pitch (from the bus) when you are doing it from another module and forget about the normalization. I would probably not use the built in connection and make a separate one through the normalized jacks myself. I understand doing this on modules that only have one front panel CV in like the A-111-5 though, Doing this allows it to have 2 CV ins when normally it doesn't. Not much room to add a jack there.
-James





> On Oct 29, 2014, at 8:58 AM, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
> 
> Thanks for the incredibly quick reply Dieter - I’m new to the Eurorack scene and have built a 100% Deeper system which sounds incredible. Just learning as I go!
> 
> Regards,
> 
> Neil
> 
> 
>> On 29 Oct 2014, at 15:55, yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
>> 
>>> Sorry to post twice in one day!
>>> 
>>> Does anyone know if there is a reason my A-111-1 doesn’t have a ‘normalised’ CV1 input? My A-110-1 breaks connection to
>>> the CV bus as soon as a cable is inserted which is how I understood it to work in general. However, the A-111-1 doesn’t
>>> which means I’m getting more control signals than I want!
>>> 
>>> Thanks,
>>> 
>>> Neill
>> 
>> Indeed there is a inconsistency  in the CV handling of the A-110 and the A-111-1. But as far as I know it's described correctly in
>> the user manuals of the modules. The A-110 uses a normalled socket with switching contact to interrupt the bus CV as soon as a plug
>> is inserted into the CV socket at the front panel. For the A-111-1 (and all other later modules that have access to the bus CV, e.g.
>> A-111-5, A-111-2) the CV's of the bus and the front panel socket are added. We found that this is more flexible than the normalling
>> version. And there is another reason: over the years (the A-100 is nearly 20 years on the market) the switching contacts may wear
>> out because of inevitable material fatigue or corrosion or unwanted dust between the metal parts of the socket. That why we try not
>> to use normalled sockets if it's avoidable.
>> 
>> Best wishes
>> Dieter Doepfer
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> ------------------------------------
>> 
>> ------------------------------------
>> 
>> 
>> ------------------------------------
>> 
>> Yahoo Groups Links
>> 
>> 
>> 
> 
> 
> 
> ------------------------------------
> 
> ------------------------------------
> 
> 
> ------------------------------------
> 
> Yahoo Groups Links
> 
> 
>