Doepfer

For those that can't read the thread because their provider has messed up the connections I think I'm correct in that the question was correctly answered. Never use sarcasm in replies it leads to irritation.! I wish I could read the threads it would make life more interesting. 
 
http://www.wizardwoodcraft.co.uk/
 
Norfolk UK
 


>________________________________
> From: "achtung_999 heinrich.himmelwasser@gmail.com [Doepfer_a100]" <Doepfer_a100@yahoogroups.com>
>To: Doepfer_a100@yahoogroups.com 
>Sent: Saturday, 24 May 2014, 15:30
>Subject: Re: AW: [Doepfer_a100] A-101-6
>  
>   
> 
>For those that did not pay attention: Yes normally it's Bill Of Materials. But in this thread it refers to this:http://www.doepfer.de/A127_BO.gif 
>On Sat, May 24, 2014 at 1:55 PM, syndromeda@telenet.be [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote: 
> 
>>  
>>Yeah right....;-)
>>
>>
>>
>>For summer 2014 the A-127
breakout module is (BOM) planned. This expansion module offers these new functions: 
>>	* additional notch filter for each sub-unit
>>	* separate outputs for lowpass, highpass, bandpass and notchfor each sub-unit
>>	* separate audio input with attenuator for each sub-unit 
>>The breakout module allows the
separate use of each of the three A-127 filters. In addition the filters can be
patched parallel or serial. Especially the serial connection of three notches
generates very complex phasing-like structures. For parallel filter connection
the existing mixer of the main module may be used or an external mixer. For
serial connection the filters are patched in the desired sequence at the
breakout module. A jumper is used to define the filter type for each sub-unit
for the mix unit of the main module.  
>>Remark: The breakout
module can be used without modification only in combination with the new version
of the A-127 (pcb printing "Version 4"). Only the new version has the
expansion connector available, that is required to connect the breakout module.
It's also possible to combine the breakout module with older versions of the
A-127 (versions 1, 2 and 3) but in this case soldering is required to connect
the breakout module to the main module (soldering 4 wires to each filter unit).
We will publish corresponding modification instructions as soon as the breakout
module will be available. 
>>Price: about Euro 65.00 
>>
>>
>>------------------------------------------------------Danny Budtsinfo@syndromeda.be http://www.syndromeda.be/
>>
>>
>>
>>________________________________
>>
>>Van: "anthony.box@talk21.com [Doepfer_a100]" <Doepfer_a100@yahoogroups.com> Aan: "Doepfer a100" <Doepfer_a100@yahoogroups.com>Verzonden: Zaterdag 24 mei 2014 11:32:10Onderwerp: Re: AW: [Doepfer_a100] A-101-6
>>
>>   
>>stands for Bill Of Materials, i.e. a list of components used.  
>> 
>>http://www.wizardwoodcraft.co.uk/
>>
>> 
>>Norfolk UK
>> 
>>
>>
>> From: "Jonathan jss9h@aol.com [Doepfer_a100]" <Doepfer_a100@yahoogroups.com>
>>>To: "Doepfer_a100@yahoogroups.com" <Doepfer_a100@yahoogroups.com> 
>>>Sent: Saturday, 24 May 2014, 10:25
>>>Subject: Re: AW: [Doepfer_a100] A-101-6
>>>  
>>>  
>>>What is a BOM please?Jonathan Shapero
>>>From my iPad Air
>>>On 24 May 2014, at 10:24, "Jonathan jss9h@aol.com [Doepfer_a100]" <Doepfer_a100@yahoogroups.com> wrote: 
>>>This message has no content.          
>>
>>       
>