Doepfer

> Hi!
>
> At the moment I have this tedious step while making music: I make
> every note slightly shorter so that they don't overlap, in order
> to get the gate to retrigger for each and every note.
>
> It's occurred to me that the A-140's retrigger input exists for
> just such a purpose, so I don't have to do that.  Is there any
> way to get the MCV-24 to output a trigger with each new note, or
> each subsequent overlapping new note?  This would save me (and
> maybe other people too?) a lot of time!
>
> Thanks,
> Zoë.

As far as I remember (the MCV24 is out of production since about 7 years)
this was possible. There was a parameter called "retrigger time" (or
similar) which was used to define the retrigger behaviour. Details should be
mentioned in the user's manual. Or you contact Christian Assall
(software@doepfer.de). He programmed the MCV24 firmware and may be he
remembers this detail.

Best wishes
Dieter Doepfer