Doepfer

Please contact our UK representative. Details on our website.

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von blair_cowan@mac.com
> Gesendet: Dienstag, 15. April 2014 10:27
> An: Doepfer_a100@yahoogroups.com
> Betreff: Re: AW: [Doepfer_a100] Dark Energy mk2 tuning and octave
> scaling behaving randomly
> 
> 
> 
> 
> Hi Dieter,
> 
> 
> I have followed the calibration process in the service manual, 
> and I can achieve very good results. However, when I switch the 
> DE2 off, and then on again several hours later, the volt/octave 
> calibration has slipped again. I retest only after the unit has 
> been on for an hour or so, Also, the time taken for tuning to 
> stabilise after up is 90 minutes rather than the usual 25 to 30 minutes.
> 
> 
> How would I order a replacement tempco board, and what would the 
> Euro cost be, including post and packaging to Glasgow, Scotland?
> 
> 
> Best wishes,
> 
> 
> Blair