Hi,
regarding my earlier post about linking (not stacking) two dark energy units using the internal midi thru buss:
I connected my two dark energy's using the supplied jumper lead, making sure that the the lead was plugged into JP5 of the sending unit, and JP6 of the receiving unit. I also ensured that the polarity was correct - ground to ground, and live to live. This did not link the two dark energy synths.
In fact, to link two dark energy's via the midi thru buss, I found I had to connect JP6 of the sending unit to JP6 of the receiving one. Now when I connect to the midi in socket of the sending unit and play a note on my keyboard, both dark energy's respond at the same time, and with the same note.
Florian, the issue here is not about including "a full midi compendium" in the Dark Energy manuals, but instead about including an entry in "section 3.4. Linking / stacking several Dark Energies" to the effect that if you want to link (as opposed to stack) two dark energy's together using the internal midi thru buss, employ a jumper lead between JP6 of each machine.
Deiter,
would it be possible to update the online manuals to reflect this? It might save other users a bit of time and frustration.
Kind regards,
Blair.