Doepfer

saturate on the VCA ? 
the A107, normally, sounds undistorted/clean with the audio input level knob up to 5 (middle). 
maybe you have set the audio input knob at full CW position ?


 
Bakis 


________________________________
 From: flosynth <fleur.de.florence01@gmail.com>
To: Doepfer_a100@yahoogroups.com 
Sent: Saturday, June 22, 2013 3:51 PM
Subject: [Doepfer_a100] Filter A-107
 


  
Hello,

I have 2 filters A-107, but the two do not sound the same way, one of my A-107 seems to saturate at the VCA

So my question is;

There are trimmers on the back of the filter, it is possible to adjust the level of the VCA and can adjust the frequency and Q, and if so with what trimmers for what functions?

thank you

Florence 


 

[Non-text portions of this message have been removed]