> Dear Dieter, > > Many thanks for taking the time to reply in person! > > There are no Doepfer markings on the underside of the pedal, or > anywhere else on the unit. > > The only label on the underside says Volume Pedal SN 09 3094 > Manikin Electronics with a website and logo. > > As described in my previous post it was purchased as a FP5 along > with an A177.2 from SchneidersLaden in Berlin. > > It came in a brown box marked FP5. > > Checking the resistance again between tip and ring of the jack > plug when swept gives roughly 0.1K to 9.4K Ohms, so I imagine it > has a 10K resistor in it? > > I mention all this to help pinpoint exactly what pedal it is, and > whether it can be used with the A177.2. > > I also tried it with the A177.2 on different sections of my rack > to check it is not an issue with the power bus, but it still put > out voltages of roughly +7v to +11v. > > Regards, > > Neal I'm quite sure that you received an unadjusted FP5. Please return the unit to the dealer and ask for a FP5 which is approved/adjusted by Doepfer. Best wishes Dieter Doepfer
Message
AW: AW: [Doepfer_a100] A-177-2 External Foot Controller II voltages?
2013-05-31 by yahoo@doepfer.de
Attachments
- No local attachments were found for this message.