yeah, modulargrid made me aware of the problem, though it's not always correct with it's values so i advise anyone to double check figures... so for an individual who fears the power of electricity, the only way to get more power is to add in a A-100 DIY Kit #1? --- In Doepfer_a100@yahoogroups.com, James Husted <james.husted@...> wrote: > > This is where sites like http://www.modulargrid.netcome in handy. Lay out your planned modules and it will tell you power requirements and prices. It has nearly every maker out there. > -James > > On May 9, 2013, at 11:26 AM, analogmonster@... wrote: > > > Yeah i have 2 of the diy kit #1 doepfer psus in one 18 u case (ie 6 bus boards, 3 bus board per psu) and this is fine for me. Just means my modular rack uses 2 wall sockets not one now. But note that you need to calculate the total current draw on a module by module basis-stated by manufacturers-not just what would seem to fit the cabinet/rack size. It is best to add the total draw for positive and the total draw for negative together then add 10%. as soon as that approaches your max current draw you need to upgrade. > > > > > > > > On 9 May 2013, at 17:25, James Husted <james.husted@...> wrote: > > > >> A second supply in the cabinet. Have one supply run one set of motherboards and the second run what is left. > >> -James > >> > >> James Husted > >> Designer, Synthwerks LLC > >> www.synthwerks.com > >> james@... > >> synthwerks@... > >> > >> On May 9, 2013, at 8:36 AM, Renato <renato.quaroni@...> wrote: > >> > >>> I'm wondering what methods could be employed to get more than the 1200mA? > >>> Please consider that my knowledge of electrical work extends as far as > >>> changing a plug... > >>> > >>> Thanks in advance, > >>> Renato > >>> > >>> > >>> [Non-text portions of this message have been removed] > >>> > >>> > >>> > >>> ------------------------------------ > >>> > >>> Yahoo! Groups Links > >>> > >>> > >>> > >> > >> > > > > > > [Non-text portions of this message have been removed] > > > > > > > > ------------------------------------ > > > > Yahoo! Groups Links > > > > > > >
Message
Re: Getting extra power to a 9U.
2013-05-10 by re_qu
Attachments
- No local attachments were found for this message.